Marmorino and Venetian plasters have been prominent since the middle ages thanks to their stunning looks and finishes. They are sometimes generically referred to as marble or polished plasters, which depend on the finishes that can be accomplished. They can be shiny, smooth, or marble textured to look like stone.

So if you’re excited about applying Venetian plaster to a specific area in your home, we’ll assist you through the process to get a successful finish.

8 Steps for a Successful Venetian Plaster Application

The antique surface finish of Venetian plaster offers an elegant look of natural stone and polished marble. Generally, Venetian plaster is applied by skilled craftsmen to achieve the proper effect and finish. Some first-timers would even register in a Venetian plaster course to make sure they professionally get the job done.

However, new products today can help DIYers attain similar results in simple methods without the professional skills needed. So below are eight steps to apply Venetian plaster wall finish on your house.

1. Choose the type of Venetian plaster you want

The kind of Venetian plaster you select will depend on your proficiency and budget. Venetian plasters come in three material variants, each with distinctive features, looks, and price ranges. You can go with acrylic, natural lime-based, or gypsum-based plasters. To know what these look like, you may check Evoke Polished Plastering website to see what would fit your taste.

2. Prepare the walls

It’s best to do a plastering job with smooth walls. Ensure all the holes in the wall are filled and the bumpy surfaces are sanded, so they do not show in the finished work.

3. Lay down tarps and prepare the tools

Laying down tarps is essential to protect the work area’s floorings, as people do when painting. Ensure your Venetian plaster trowels, spatulas, blades, cloths, and sponges are ready to ensure a smooth process and prevent intermittent productivity from finding the tools necessary for the project. You may browse the web for trusted suppliers if you need to buy Marmorino Novacolor and tools for your do-it-yourself project or business.

4. Prime the wall

After sanding and smoothing the wall, apply primer. This will help bind the plaster you’ll utilize later, acting like an adhesive or glue. Make sure it’s fully dry before you do the next step.

5. Apply the first coat

Use a trowel to apply the plaster’s base coat. Spread the plaster in the thinnest possible way while applying small or random strokes and patterns. Avoid spreading it in the same direction. Hold the trowel at an angle of 15 to 30 degrees and frequently wipe it with a dry cloth to keep the plaster dust from affecting your pattern.

6. Apply the second coat

The second coat is meant to smoothen the ridges from the first coat and is usually lighter. Put plaster on the trowel and smooth out the previous strokes on the wall. Leave some areas uncovered, so the first coat shows through small patches. If you’re not satisfied with the result of the second coat, you can apply a third coat if you want.

7. Burnish the finish

Using a clean trowel before the second coat completely dries, burnish the wall and slide it all over the plaster. Hold the trowel at a 30-degree angle and use moderate pressure to give it a polished look. Burnishing it more can make your plaster look shinier. Wait for two days before proceeding to the following procedure.

8. Wax the plaster

Applying a topcoat of protective wax to the plaster can brighten your wall, smoothen it, and secure it from moisture. Apply the material to the wall using a sponge in circular motions. You can apply two to three thin coats to wrap up.